What sizes does Louisiana-Pacific LVL come in?

Calcs.com carries 136 Louisiana-Pacific sections across E10 LSL, E13 LVL and E14 LVL. Depths run from 70 mm to 457 mm (70, 90, 95, 120, 130, 140, 150, 170, 190, 200, 220, 225, 240, 241, 290, 300, 302, 356, 360, 400, 406, 457 mm), in breadths of 35, 45, 63, 89 mm. Every one of those sections is selectable in the calculators listed on this page.

Is there a span table for Louisiana-Pacific LVL?

This page publishes section properties and characteristic values, not allowable spans. A span is not a property of the section: it depends on the loads you apply, the member spacing, and the deflection limit you design to, so the same section spans different distances on different jobs. Rather than reading a span off a generic table, select the Louisiana-Pacific section in a Calcs.com calculator and enter your actual loads. The calculator checks bending, shear, bearing, and deflection and reports the governing limit.

What are the characteristic values for Louisiana-Pacific E10 LSL?

E10 LSL is published with modulus of elasticity 10,000 MPa, characteristic shear strength 5.3 MPa, compression parallel to grain 28 MPa and approximate density 745 kg/m3. Characteristic bending strength varies with depth, from 31.2 MPa to 32 MPa across the sizes in the table above. Values are taken from LP SolidStart Tech Note - Australia Design Values (1 May 2011) and LP SolidStart Tech Note - Australia Design Values (1 May 2011) & LP SolidStart LV E14 Sales Sheet AU (2011), so check them against the manufacturer's current design guide before you rely on them.

What are the characteristic values for Louisiana-Pacific E13 LVL?

E13 LVL is published with modulus of elasticity 13,200 MPa, characteristic shear strength 4.6 MPa, compression parallel to grain 31 MPa and approximate density 660 kg/m3. Characteristic bending strength varies with depth, from 35.8 MPa to 38 MPa across the sizes in the table above. Values are taken from LP SolidStart Tech Note - Australia Design Values (1 May 2011) and LP SolidStart Tech Note - Australia Design Values (1 May 2011) & LP SolidStart LV E14 Sales Sheet AU (2011), so check them against the manufacturer's current design guide before you rely on them.

What are the characteristic values for Louisiana-Pacific E14 LVL?

E14 LVL is published with modulus of elasticity 14,000 MPa, characteristic shear strength 5.3 MPa, compression parallel to grain 42 MPa and approximate density 660 kg/m3. Characteristic bending strength varies with depth, from 39.5 MPa to 42 MPa across the sizes in the table above. Values are taken from LP SolidStart Tech Note - Australia Design Values (1 May 2011) and LP SolidStart Tech Note - Australia Design Values (1 May 2011) & LP SolidStart LV E14 Sales Sheet AU (2011), so check them against the manufacturer's current design guide before you rely on them.

Does Calcs.com support Louisiana-Pacific products?

Yes. 136 Louisiana-Pacific sections are built into the section library, so you select them from a dropdown rather than entering properties by hand. They are available in 8 calculators, listed on this page.

Louisiana-Pacific LVL sizes and properties

Calcs.com carries 136 Louisiana-Pacific LVL sections across 8 calculators. The section properties and characteristic values are the ones Louisiana-Pacific publishes.

Design a beam now See every size

No credit card required

Louisiana-Pacific

Louisiana-Pacific products are in the Calcs.com section library because engineers specify them. Claim this page to connect your sales team, confirm your published values, and see which calculations use your products.

Is this your company? Claim this page

Every Louisiana-Pacific LVL section

All 136 Louisiana-Pacific sections in the Calcs.com library, with the section properties and characteristic values used to design them.

These are section properties and characteristic values, not allowable spans. A span depends on your loads, member spacing, and deflection limit, so it has to be calculated.

Louisiana-Pacific E10 LSL LVL

48 sections. Depths: 90, 120, 130, 140, 150, 170, 190, 200, 225, 240, 241, 290, 300, 302, 356, 360 mm. Breadths: 35, 45, 89 mm.

Published for the whole product line

E 10,000 MPaf's 5.3 MPaf'c 28 MPa745 kg/m3JD4Seasoned

Louisiana-Pacific E13 LVL

44 sections. Depths: 70, 90, 95, 120, 130, 140, 150, 170, 190, 200, 220, 240, 241, 290, 300, 302, 356, 360, 400, 406, 457 mm. Breadths: 35, 45, 63 mm.

Published for the whole product line

E 13,200 MPaf's 4.6 MPaf'c 31 MPa660 kg/m3JD4Seasoned

Louisiana-Pacific E14 LVL

44 sections. Depths: 70, 90, 95, 120, 130, 140, 150, 170, 190, 200, 220, 240, 241, 290, 300, 302, 356, 360, 400, 406, 457 mm. Breadths: 35, 45, 63 mm.

Published for the whole product line

E 14,000 MPaf's 5.3 MPaf'c 42 MPa660 kg/m3JD4Seasoned

Find a size

Product

Breadth (mm)

Showing all 136 sections

Louisiana-Pacific section properties and characteristic values
Size (D x B)	Area (mm2)	I (mm4)	Z (mm3)	f'b (MPa)	f't (MPa)
Louisiana-Pacific E10 LSL LVL48 sections
90 x 35	3,150	2,126,250	47,250	32	20
90 x 45	4,050	2,733,750	60,750	32	20
90 x 89	8,010	5,406,750	120,150	32	20
120 x 35	4,200	5,040,000	84,000	32	20
120 x 45	5,400	6,480,000	108,000	32	20
120 x 89	10,680	12,816,000	213,600	32	20
130 x 35	4,550	6,407,917	98,583	32	20
130 x 45	5,850	8,238,750	126,750	32	20
130 x 89	11,570	16,294,417	250,683	32	20
140 x 35	4,900	8,003,333	114,333	32	20
140 x 45	6,300	10,290,000	147,000	32	20
140 x 89	12,460	20,351,333	290,733	32	20
150 x 35	5,250	9,843,750	131,250	32	20
150 x 45	6,750	12,656,250	168,750	32	20
150 x 89	13,350	25,031,250	333,750	32	20
170 x 35	5,950	14,329,583	168,583	32	19.6
170 x 45	7,650	18,423,750	216,750	32	19.6
170 x 89	15,130	36,438,083	428,683	32	19.6
190 x 35	6,650	20,005,417	210,583	32	19.2
190 x 45	8,550	25,721,250	270,750	32	19.2
190 x 89	16,910	50,870,917	535,483	32	19.2
200 x 35	7,000	23,333,333	233,333	32	19.1
200 x 45	9,000	30,000,000	300,000	32	19.1
200 x 89	17,800	59,333,333	593,333	32	19.1
225 x 35	7,875	33,222,656	295,313	32	18.7
225 x 45	10,125	42,714,844	379,688	32	18.7
225 x 89	20,025	84,480,469	750,938	32	18.7
240 x 35	8,400	40,320,000	336,000	32	18.5
240 x 45	10,800	51,840,000	432,000	32	18.5
240 x 89	21,360	102,528,000	854,400	32	18.5
241 x 35	8,435	40,826,103	338,806	32	18.5
241 x 45	10,845	52,490,704	435,608	32	18.5
241 x 89	21,449	103,814,947	861,535	32	18.5
290 x 35	10,150	71,134,583	490,583	32	17.9
290 x 45	13,050	91,458,750	630,750	32	17.9
290 x 89	25,810	180,885,083	1,247,483	32	17.9
300 x 35	10,500	78,750,000	525,000	32	17.8
300 x 45	13,500	101,250,000	675,000	32	17.8
300 x 89	26,700	200,250,000	1,335,000	32	17.8
302 x 35	10,570	80,335,523	532,023	32	17.8
302 x 45	13,590	103,288,530	684,030	32	17.8
302 x 89	26,878	204,281,759	1,352,859	32	17.8
356 x 35	12,460	131,594,213	739,293	31.2	17.3
356 x 45	16,020	169,192,560	950,520	31.2	17.3
356 x 89	31,684	334,625,285	1,879,917	31.2	17.3
360 x 35	12,600	136,080,000	756,000	31.2	17.3
360 x 45	16,200	174,960,000	972,000	31.2	17.3
360 x 89	32,040	346,032,000	1,922,400	31.2	17.3
Louisiana-Pacific E13 LVL44 sections
70 x 35	2,450	1,000,417	28,583	38	25
70 x 45	3,150	1,286,250	36,750	38	25
90 x 35	3,150	2,126,250	47,250	38	25
90 x 45	4,050	2,733,750	60,750	38	25
90 x 63	5,670	3,827,250	85,050	38	25
95 x 45	4,275	3,215,156	67,688	38	25
95 x 63	5,985	4,501,219	94,763	38	25
120 x 35	4,200	5,040,000	84,000	38	25
120 x 45	5,400	6,480,000	108,000	38	25
130 x 45	5,850	8,238,750	126,750	38	25
130 x 63	8,190	11,534,250	177,450	38	25
140 x 35	4,900	8,003,333	114,333	38	25
140 x 45	6,300	10,290,000	147,000	38	25
150 x 45	6,750	12,656,250	168,750	38	25
150 x 63	9,450	17,718,750	236,250	38	25
170 x 35	5,950	14,329,583	168,583	38	24.5
170 x 45	7,650	18,423,750	216,750	38	24.5
170 x 63	10,710	25,793,250	303,450	38	24.5
190 x 35	6,650	20,005,417	210,583	38	24
190 x 45	8,550	25,721,250	270,750	38	24
200 x 45	9,000	30,000,000	300,000	38	23.8
200 x 63	12,600	42,000,000	420,000	38	23.8
220 x 35	7,700	31,056,667	282,333	38	23.5
220 x 45	9,900	39,930,000	363,000	38	23.5
240 x 35	8,400	40,320,000	336,000	38	23.1
240 x 45	10,800	51,840,000	432,000	38	23.1
240 x 63	15,120	72,576,000	604,800	38	23.1
241 x 45	10,845	52,490,704	435,608	38	23.1
241 x 63	15,183	73,486,985	609,851	38	23.1
290 x 35	10,150	71,134,583	490,583	38	22.4
290 x 45	13,050	91,458,750	630,750	38	22.4
300 x 45	13,500	101,250,000	675,000	38	22.3
300 x 63	18,900	141,750,000	945,000	38	22.3
302 x 45	13,590	103,288,530	684,030	38	22.2
302 x 63	19,026	144,603,942	957,642	38	22.2
356 x 45	16,020	169,192,560	950,520	37.1	21.6
356 x 63	22,428	236,869,584	1,330,728	37.1	21.6
360 x 45	16,200	174,960,000	972,000	37	21.6
360 x 63	22,680	244,944,000	1,360,800	37	21.6
400 x 45	18,000	240,000,000	1,200,000	36.5	21.2
400 x 63	25,200	336,000,000	1,680,000	36.5	21.2
406 x 45	18,270	250,962,810	1,236,270	36.4	21.2
406 x 63	25,578	351,347,934	1,730,778	36.4	21.2
457 x 45	20,565	357,914,974	1,566,368	35.8	20.8
Louisiana-Pacific E14 LVL44 sections
70 x 35	2,450	1,000,417	28,583	42	25
70 x 45	3,150	1,286,250	36,750	42	25
90 x 35	3,150	2,126,250	47,250	42	25
90 x 45	4,050	2,733,750	60,750	42	25
90 x 63	5,670	3,827,250	85,050	42	25
95 x 45	4,275	3,215,156	67,688	42	25
95 x 63	5,985	4,501,219	94,763	42	25
120 x 35	4,200	5,040,000	84,000	42	25
120 x 45	5,400	6,480,000	108,000	42	25
130 x 45	5,850	8,238,750	126,750	42	25
130 x 63	8,190	11,534,250	177,450	42	25
140 x 35	4,900	8,003,333	114,333	42	25
140 x 45	6,300	10,290,000	147,000	42	25
150 x 45	6,750	12,656,250	168,750	42	25
150 x 63	9,450	17,718,750	236,250	42	25
170 x 35	5,950	14,329,583	168,583	42	24.5
170 x 45	7,650	18,423,750	216,750	42	24.5
170 x 63	10,710	25,793,250	303,450	42	24.5
190 x 35	6,650	20,005,417	210,583	42	24
190 x 45	8,550	25,721,250	270,750	42	24
200 x 45	9,000	30,000,000	300,000	42	23.8
200 x 63	12,600	42,000,000	420,000	42	23.8
220 x 35	7,700	31,056,667	282,333	42	23.5
220 x 45	9,900	39,930,000	363,000	42	23.5
240 x 35	8,400	40,320,000	336,000	42	23.1
240 x 45	10,800	51,840,000	432,000	42	23.1
240 x 63	15,120	72,576,000	604,800	42	23.1
241 x 45	10,845	52,490,704	435,608	42	23.1
241 x 63	15,183	73,486,985	609,851	42	23.1
290 x 35	10,150	71,134,583	490,583	42	22.4
290 x 45	13,050	91,458,750	630,750	42	22.4
300 x 45	13,500	101,250,000	675,000	42	22.3
300 x 63	18,900	141,750,000	945,000	42	22.3
302 x 45	13,590	103,288,530	684,030	42	22.2
302 x 63	19,026	144,603,942	957,642	42	22.2
356 x 45	16,020	169,192,560	950,520	41	21.6
356 x 63	22,428	236,869,584	1,330,728	41	21.6
360 x 45	16,200	174,960,000	972,000	40.9	21.6
360 x 63	22,680	244,944,000	1,360,800	40.9	21.6
400 x 45	18,000	240,000,000	1,200,000	40.3	21.2
400 x 63	25,200	336,000,000	1,680,000	40.3	21.2
406 x 45	18,270	250,962,810	1,236,270	40.2	21.2
406 x 63	25,578	351,347,934	1,730,778	40.2	21.2
457 x 45	20,565	357,914,974	1,566,368	39.5	20.8

Characteristic values are taken from LP SolidStart Tech Note - Australia Design Values (1 May 2011) and LP SolidStart Tech Note - Australia Design Values (1 May 2011) & LP SolidStart LV E14 Sales Sheet AU (2011). Last reviewed against the published catalog 7 years ago. If you are specifying to the current catalog, check the values against Louisiana-Pacific's latest published design criteria.

Calculators that carry Louisiana-Pacific sections

136 sections available across these calculators.

Portal Frame Analysis Wizard

Truss Analysis Wizard

Timber Nail

AS 1720.1:2010

Timber Screw

AS 1720.1:2010

Cross-Section Database

Frequently asked questions

Design with Louisiana-Pacific products

Every section above is already in the calculators. Start a free trial and specify them directly.

Start free trial Talk to us about partnering

No credit card required

Linking a calculation to a column in Calcs.com, with the AISC Steel Construction Manual reference attached

We use analytics cookies to understand how you use this site and improve our content. See our privacy policy and cookie policy for details.

Louisiana-Pacific LVL sizes and properties

Every Louisiana-Pacific LVL section

Louisiana-Pacific E10 LSL LVL

Louisiana-Pacific E13 LVL

Louisiana-Pacific E14 LVL

Calculators that carry Louisiana-Pacific sections

Timber Complex Beam

Timber Column

Timber Member (Design Only)

Portal Frame Analysis Wizard

Truss Analysis Wizard

Timber Nail

Timber Screw

Cross-Section Database

Frequently asked questions

What sizes does Louisiana-Pacific LVL come in?

Is there a span table for Louisiana-Pacific LVL?

What are the characteristic values for Louisiana-Pacific E10 LSL?

What are the characteristic values for Louisiana-Pacific E13 LVL?

What are the characteristic values for Louisiana-Pacific E14 LVL?

Does Calcs.com support Louisiana-Pacific products?

Design with Louisiana-Pacific products